3D-image, product, Wired Mats, marine, offshore, SeaRox
RockWorld imagery, products with life, pipes, oil rig, rti. Technical
Firesafe Insulation

SeaRox WM 660

SeaRox WM 660 is a mat made of stone wool. The product is specially developed to provide maximum fire protection. SeaRox WM 660 can be supplied with reinforced alu foil.

Back

SeaRox WM 660 is a mat made of stone wool. The product is specially developed to provide maximum fire protection. SeaRox WM 660 can be supplied with reinforced alu foil.

SeaRox WM 660 is used for hydrocarbon fire protection of bulkheads, decks and firewalls.

Firesafe

The ROCKWOOL Technical Insulation products are based on stone wool, which cannot burn and which can stand temperatures up to 1000 degrees C without melting. Thus ROCKWOOL stone wool provides the best guarantee for an effective fire protection on board ships and offshore platforms.

Learn more
Acoustic

What is sound? In physical terms, sound is the mechanical vibration of a gaseous, liquid or solid elastic medium. Sound is a form of mechanical energy. It is produced, when particles oscillate around their equilibrium position.

Learn more
Comfort

The requirements of the indoor climate and comfort have become more stringent during the recent years. The insulation constitutes an important factor of this, as it ensures obtaining that the correct temperature is obtained.

Learn more
Thermal

To guarantee a correct process cycle, the condition of the media within the pipes must remain within the set limitations (e.g. temperature, viscosity, pressure, etc.). In addition to the correct isometric construction and fastening of the piping, the piping insulation also has an important function. It must ensure that the heat losses are effectively reduced and that the installation continues to operate economically and functionally on a permanent basis. This is the only way to guarantee the maximum efficiency of the process cycle throughout the design service life without losses as a result of faults.

Learn more
Outfitting

To obtain a good comfort, a good noise reduction is required between the individual decks. To prevent noise – particularly impact sound and structure borne noise– from travelling from one cabin to another you must use an insulation solution which has the necessary rigidity, elasticity and noise reduction/absorption.

Learn more
Facings

There are many reasons for choosing insulation products with facings. It is generally done to obtain a vapour barrier, which prevents formation of condensation on the cold side of a construction.

Learn more
Back

Downloads:

documents

 

 

print pdf
icon
SeaRox Products & Solutions
SeaRox Products & Solutions

Product Catalogue with all technical information about our SeaRox products for industrial insulation for the shipbuilding & offshore market worldwide.

icon
SeaRox Acoustic Manual
SeaRox Acoustic Manual

The brochure will contain a readable walk-trough in the theory of sound, noise and reduction, along with a section of more specific theory incl. some of the commonly used formulas. It contains a section describing the possibilities of utilising ROCKWOOL SeaRox products in solutions for excellent noise regulation.

icon
SeaRox Acoustic Foil System
SeaRox Acoustic Foil System

This brochure describes SeaRox Acoustic Foil as part of the optimal system for sound absorption specifically designed for engine rooms, cargo pump rooms and similar applications.

icon
SeaRox WM 660
SeaRox WM 660

SeaRox WM 660 is a mat made of stone wool. The product is specially developed to provide maximum fire protection. SeaRox WM 660 can be supplied with reinforced alu foil.