Installation guidance videos

Our ‘how to’ video series will show you how easy it is to fit, secure and protect your insulation for maximum performance.

Whether you are new to installing industrial insulation, or want to know what makes ROCKWOOL stonewool different, these simple installation guides will demonstrate best practice for measuring, cutting, fitting and securing your stonewool industrial insulation. 

These videos show the installation of wired mat, pipe section and compression resistance mat insulation in straight pipe, pipe bend, vessel and valve box applications.

Installation Video Guide; Safety clothes, tools and preparation, RW-TI, Rockwool
Installation Video Guidance

01 – Safety clothes, tools and preparation

Get ready to install your ROCKWOOL insulation. Watch this video to see which PPE is required for installing ROCKWOOL insulation, the tools you need, and the other requirements for a successful installation.

Watch the video
Installation Video Guide; Application of a pipe section on straight pipe, RW-TI, Rockwool
Installation Video Guidance

02 – Application of a pipe section on straight pipe

Installing ROCKWOOL insulation on your straight pipes couldn’t be easier. Watch the video to see how simple it is to cut the premade pipe sections to size and secure them to your pipes. Efficient insulation that lasts.

Watch the video
Installation Video Guide; Application of a wired mat on straight pipe, RW-TI, Rockwool
Installation Video Guidance

03 – Application of a wired mat on straight pipe

Watch this simple installation guide and see how easy it is to apply, secure and protect your wired mat insulation for straight pipes. Our expert demonstrates how to bind the insulation to the pipe for maximum performance.

Watch the video
Installation Video Guide; Application of pipe sections on a bend, RW-TI, Rockwool
Installation Video Guidance

04 – Application of pipe sections on a bend

Ensure you are properly applying, securing and protecting your ROCKWOOL insulation for pipe bends by watching this simple installation guide. Here you will see the installation of both individually cut sections and prefabricated pipe bends being demonstrated by our expert.

Watch the video
Installation Video Guide; Application of wired mats on a bend, RW-TI, Rockwool
Installation Video Guidance

05 – Application of wired mats on a bend

This simple insulation guide demonstrates how to use wired mat insulation on pipe bends. Simply cut the insulation to size using a template and secure either by twisting the wire or with binding wire. Use cladding to protect the insulation against mechanical damage and weather.

Watch the video
Installation Video Guide; Application of pipe sections on a T-Piece, RW-TI, Rockwool
Installation Video Guidance

06 – Application of pipe sections on a T-Piece

See our installer make short work of a T-piece insulation job with ROCKWOOL pipe sections. This video demonstrates how to cut the insulation to size, and secure for maximum performance.

Watch the video
Installation Video Guide; Application of compression resistance mat on a vessel, RW-TI, Rockwool
Installation Video Guide

07 – Application of compression resistance mat on a vessel

This video demonstrates how easy it is to work with compression resistance mat insulation. Our installers show you how to cut, fit, secure and protect your insulation for long-term high performance.

Watch the video
Installation Video Guide; Application of a wired mat on a vessel, RW-TI, Rockwool
Installation Video Guidance

08 – Application of a wired mat on a vessel

Learn how to measure, cut, fit and secure wired mat insulation to insulate your vessel. This simple ‘how to’ guide demonstrates how easy the wired mat insulation is to work with, as well as how to ensure optimal performance.

Watch the video
Installation Video Guide; Application of a wired mat for a valve, RW-TI, Rockwool
Installation Video Guidance

09 – Application of a wired mat for a valve box

Learn how to insulate a valve box with ROCKWOOL wired mats. Watch this video to see the installer measure the required amount of wired mat and cut to size. He then places the wired mat into the valve box and secures it with wool pins. Finally, he places the valve box over the valve and closes it up.

Watch the video

Tools

Learn more

Documentation

Learn more

Contact

Contact us